wallaroo.assay_config

def unwrap(v: Optional[~T]) -> ~T:

Simple function to placate pylance

class BaselineConfig:

Abstract base class for Baseline config objects. Currently only FixedBaseline is implemented though SlidingBaseline and others are planned.

BaselineConfig()
def to_json(self) -> str:
class FixedBaseline(BaselineConfig):

The FixedBaseline is calculate from the inferences from a specific time window.

FixedBaseline( pipeline_name: str, model_name: str, start: datetime.datetime, end: datetime.datetime)
Inherited Members
BaselineConfig
to_json
class BaselineBuilder(abc.ABC):

Helper class that provides a standard way to create an ABC using inheritance.

@abstractmethod
def build(self) -> wallaroo.assay_config.BaselineConfig:
def to_json(self) -> str:
def ensure_tz(d: datetime.datetime) -> datetime.datetime:

Ensure the date it tz aware. If naive assume it is in utc.

class FixedBaselineBuilder(BaselineBuilder):

Helps to easily create the config object for a FixedBaseline.

FixedBaselineBuilder(pipeline_name: str)
def add_model_name(self, model_name: str):

Specify the model to use in the baseline

def add_start(self, start: datetime.datetime):

Specify the start of the window for the baseline

def add_end(self, end: datetime.datetime):

Specify the end of the window for the baseline

def build(self) -> wallaroo.assay_config.FixedBaseline:

Create the FixedBaseline object.

Inherited Members
BaselineBuilder
to_json
class SummarizerConfig:

The summarizer specifies how the bins of the baseline and window should be compared.

SummarizerConfig()
def to_json(self) -> str:
class BinMode(builtins.str, enum.Enum):

How should we calculate the bins. NONE - no bins. Only useful if we only care about the mean, median, etc. EQUAL - evenly spaced bins: min - max / num_bins QUANTILE - based on percentages. If num_bins is 5 then quintiles so bins are created at the 20%, 40%, 60%, 80% and 100% points. PROVIDED - user provides the edge points for the bins.

NONE = <BinMode.NONE: 'None'>
EQUAL = <BinMode.EQUAL: 'Equal'>
QUANTILE = <BinMode.QUANTILE: 'Quantile'>
PROVIDED = <BinMode.PROVIDED: 'Provided'>
Inherited Members
enum.Enum
name
value
builtins.str
encode
replace
split
rsplit
join
capitalize
casefold
title
center
count
expandtabs
find
partition
index
ljust
lower
lstrip
rfind
rindex
rjust
rstrip
rpartition
splitlines
strip
swapcase
translate
upper
startswith
endswith
removeprefix
removesuffix
isascii
islower
isupper
istitle
isspace
isdecimal
isdigit
isnumeric
isalpha
isalnum
isidentifier
isprintable
zfill
format
format_map
maketrans
class Aggregation(builtins.str, enum.Enum):

What we use to calculate the score. EDGES - distnces between the edges. DENSITY - percentage of values that fall in each bin. CUMULATIVE - cumulative percentage that fall in the bins.

EDGES = <Aggregation.EDGES: 'Edges'>
DENSITY = <Aggregation.DENSITY: 'Density'>
CUMULATIVE = <Aggregation.CUMULATIVE: 'Cumulative'>
Inherited Members
enum.Enum
name
value
builtins.str
encode
replace
split
rsplit
join
capitalize
casefold
title
center
count
expandtabs
find
partition
index
ljust
lower
lstrip
rfind
rindex
rjust
rstrip
rpartition
splitlines
strip
swapcase
translate
upper
startswith
endswith
removeprefix
removesuffix
isascii
islower
isupper
istitle
isspace
isdecimal
isdigit
isnumeric
isalpha
isalnum
isidentifier
isprintable
zfill
format
format_map
maketrans
class Metric(builtins.str, enum.Enum):

How we calculate the score. MAXDIFF - maximum difference between corresponding bins. SUMDIFF - sum of differences between corresponding bins. PSI - Population Stability Index

MAXDIFF = <Metric.MAXDIFF: 'MaxDiff'>
SUMDIFF = <Metric.SUMDIFF: 'SumDiff'>
PSI = <Metric.PSI: 'PSI'>
Inherited Members
enum.Enum
name
value
builtins.str
encode
replace
split
rsplit
join
capitalize
casefold
title
center
count
expandtabs
find
partition
index
ljust
lower
lstrip
rfind
rindex
rjust
rstrip
rpartition
splitlines
strip
swapcase
translate
upper
startswith
endswith
removeprefix
removesuffix
isascii
islower
isupper
istitle
isspace
isdecimal
isdigit
isnumeric
isalpha
isalnum
isidentifier
isprintable
zfill
format
format_map
maketrans
class UnivariateContinousSummarizerConfig(SummarizerConfig):

The UnivariateContinousSummarizer analyizes one input or output feature (Univariate) at a time. Expects the values to be continous or at least numerous enough to fall in various/all the bins.

UnivariateContinousSummarizerConfig( bin_mode: wallaroo.assay_config.BinMode, aggregation: wallaroo.assay_config.Aggregation, metric: wallaroo.assay_config.Metric, num_bins: int, bin_weights: Optional[List[float]] = None, bin_width: Optional[float] = None, provided_edges: Optional[List[float]] = None, add_outlier_edges: bool = True)
Inherited Members
SummarizerConfig
to_json
class SummarizerBuilder(abc.ABC):

Helper class that provides a standard way to create an ABC using inheritance.

@abstractmethod
def build(self) -> wallaroo.assay_config.SummarizerConfig:
class UnivariateContinousSummarizerBuilder(SummarizerBuilder):

Builds the UnviariateSummarizer

UnivariateContinousSummarizerBuilder()
def build(self) -> wallaroo.assay_config.UnivariateContinousSummarizerConfig:
def add_bin_mode( self, bin_mode: wallaroo.assay_config.BinMode, edges: Optional[List[float]] = None):

Sets the binning mode. If BinMode.PROVIDED is specified a list of edges is also required.

def add_num_bins(self, num_bins: int):

Sets the number of bins. If weights have been previously set they must be set to none to allow changing the number of bins.

def add_bin_weights(self, weights: Optional[List[float]]):

Specifies the weighting to be given to the bins. The number of weights must be 2 larger than the number of bins to accomodate outliers smaller and outliers larger than values seen in the baseline. The passed in values can be whole or real numbers and do not need to add up to 1 or any other specific value as they will be normalized during the score calculation phase. The weights passed in can be none to remove previously specified weights and to allow changing of the number of bins.

def add_metric(self, metric: wallaroo.assay_config.Metric):

Sets the metric mode.

def add_aggregation(self, aggregation: wallaroo.assay_config.Aggregation):

Sets the aggregation style.

def add_bin_edges(self, edges: Optional[List[float]]):

Specifies the right hand side (max value) of the bins. The number of edges must be equal to or one more than the number of bins. When equal to the number of bins the edge for the left outlier bin is calculated from the baseline. When an additional edge (one more than number of bins) that first (lower) value is used as the max value for the left outlier bin. The max value for the right hand outlier bin is always Float MAX.

class WindowConfig:

Configures a window to be compared against the baseline.

WindowConfig( pipeline_name: str, model_name: str, width: str, start: Optional[datetime.datetime] = None, interval: Optional[str] = None)
def to_json(self) -> str:
class WindowBuilder:

Helps build a WindowConfig. model and width are required but there are no good default values for them because they depend on the baseline. We leave it up to the assay builder to configure the window correctly after it is created.

WindowBuilder(pipeline_name: str)
def add_model_name(self, model_name: str):

The model name (model_id) that the window should analyze.

def add_width(self, **kwargs: int):

The width of the window to use when collecting data for analysis.

def add_interval(self, **kwargs: int):

The width of the window to use when collecting data for analysis.

def add_start(self, start: datetime.datetime):
def build(self) -> wallaroo.assay_config.WindowConfig:
def ConfigEncoder(o):

Used to format datetimes as we need when encoding to JSON

class AssayConfig:

Configuration for an Assay record.

AssayConfig( client: Optional[wallaroo.client.Client], name: str, pipeline_id: int, pipeline_name: str, active: bool, status: str, iopath: str, baseline: wallaroo.assay_config.BaselineConfig, window: wallaroo.assay_config.WindowConfig, summarizer: wallaroo.assay_config.SummarizerConfig, warning_threshold: Optional[float], alert_threshold: float, run_until: Optional[datetime.datetime], workspace_id: Optional[int])
def to_json(self) -> str:
def interactive_run(self) -> wallaroo.assay.AssayAnalysisList:

Runs this assay interactively. The assay is not saved to the database nor are analyis records saved to a Plateau topic. Useful for exploring pipeline inference data and experimenting with thresholds.

def interactive_baseline_run(self) -> Optional[wallaroo.assay.AssayAnalysis]:
def interactive_input_run_arrow( self, inferences: pandas.core.frame.DataFrame, labels: Optional[List[str]]) -> wallaroo.assay.AssayAnalysisList:
def interactive_input_run_legacy( self, inferences: List[Dict], labels: Optional[List[str]]) -> wallaroo.assay.AssayAnalysisList:
def interactive_input_run( self, inferences: Union[List[Dict], pandas.core.frame.DataFrame], labels: Optional[List[str]]) -> wallaroo.assay.AssayAnalysisList:

Analyzes the inputs given to create an interactive run for each feature column. The assay is not saved to the database nor are analyis records saved to a Plateau topic. Usefull for exploring inputs for possible causes when a difference is detected in the output.

class AssayBuilder:

Helps build an AssayConfig

AssayBuilder( client: Optional[wallaroo.client.Client], name: str, pipeline_id: int, pipeline_name: str, model_name: str, baseline_start: datetime.datetime, baseline_end: datetime.datetime, iopath: str)
def baseline_dataframe(self):
def baseline_histogram( self, bins: Union[int, str, NoneType] = None, log_scale: bool = False):
def baseline_kde(self, log_scale: bool = False):
def baseline_ecdf(self, log_scale: bool = False):
def build(self) -> wallaroo.assay_config.AssayConfig:
def upload(self) -> int:
def add_name(self, name: str):

Specify the assay name

def add_active(self, active: bool):

Specify if the assay is active or not

def add_iopath(self, iopath: str):

Specify what the assay should analyze. Should start with input or output and have indexes (zero based) into row and column: For example 'input 0 1' specifies the second column of the first input.

def fixed_baseline_builder(self):

Specify creates a fixed baseline builder for this assay builder.

def add_baseline(self, baseline: wallaroo.assay_config.BaselineConfig):

Adds a specific baseline created elsewhere.

def window_builder(self):

Returns this assay builders window builder.

def add_window(self, window: wallaroo.assay_config.WindowConfig):

Adds a window created elsewhere.

def univariate_continuous_summarizer(self) -> wallaroo.assay_config.UnivariateContinousSummarizerBuilder:

Creates and adds an UCS to this assay builder.

def add_summarizer(self, summarizer: wallaroo.assay_config.SummarizerConfig):

Adds the summarizer created elsewhere to this builder.

def add_warning_threshold(self, warning_threshold: float):

Specify the warning threshold for this assay.

def add_alert_threshold(self, alert_threshold: float):

Specify the alert threshold for this assay.

def add_run_until(self, run_until: datetime.datetime):

"How long should this assay run. Primarily useful for interactive runs to limit the number of analysis.

def calc_bins(num_samples: int, bins: Union[int, str, NoneType]) -> Union[str, int]:

If the users specifies a number of bins or a strategy for calculating it use that. Else us the min of the square root or 50.